How to charge with an RFID card

RFID card

a. After the charger is connected to the EV, a yellow light will switch on indicating that it is ready for charging.

b. Scan the RFID card once on the identification area of the front panel after which the charging starts. When the charging starts, the gun will be locked into the charger socket. The charger LED will change to a slow green pulse to indicate charging.

c. Charging will automatically stop when the EV is fully charged, and the charger LED indicator will be solid green.

d. Please end the charging session by scanning the RFID card for a second time. If you do not scan the RFID card again, the charger will not unlock the gun on the charger side, and the user cannot unplug the charging gun.

e. When an EV is being charged, the user can stop charging by scanning the RFID card for a second time. The charging session will end, and the gun on the charger side will be unlocked.

f. Another solution to stop charging is to end the charging session from the EV side. After the gun on the EV side is unlocked and plugged out, the charging session will end, and the gun on the charger side will be unlocked automatically.